WR RIFLE BARREL REMOVAL TOOLS
WR MATCH and BENCHREST BARREL VEE VICE - LIGHTWEIGHT(FOR AFTERMARKET MATCH FITTED BARRELS ONLY)
This barrel vise by WR is improved from the previous 1998 versions used by so many shooters.- Alum hard black anodised top and bottom Vee blocks.(a steel bottom Vee block also available for more permanent bench mounting)- Caters for 2 barrel sizes - up to 18mm barrels and up to 38mm barrels.- 19mm hex high tensile fine thread bolts for maximum clamping.- Clamp or bolt to a sturdy surface or brace.- Light weight and portable.- The most versatile light weight high strength vise at this price on the market.PN: 6052, A$197ea AVAILABLE NOW.
==============================================================================
WR BARREL BUSHING TYPE VISE - HEAVY DUTY(TO GET OFF STUBBORN FACTORY BARRELS)
Since our first bush verison done in 2004, we've had great success getting off the almost impossible to remove factory barrels from rifles. This latest version is the best yet, and works very well.- Heat Treated 40CR steel. Black surface finished.- 19mm hex high tensile fine thread bolts for tight lockup clamping.- Clamp or bolt to a sturdy brace, but the tougher the barrel - the stronger the brace needs to be. Native thru hole is Ø25mm.PN: 6061, Main vice clam with no bushes A$220ea AVAILABLE NOW.
(Bushes are extras)- Uses aluminium bushes to reduce marking and increase positive surface grip area to help prevent the barrel free spinning.
Select Bushing sizes as needed.
17mm PN: 6071, A$44ea AVAILABLE NOW.18mm PN: 6072, A$44ea AVAILABLE NOW.19mm PN: 6073, A$44ea AVAILABLE NOW.20mm PN: 6074, A$44ea AVAILABLE NOW.21mm PN: 6075, A$44ea AVAILABLE NOW.21.5mm PN: 6076, A$44ea AVAILABLE NOW.22mm PN: 6077, A$44ea AVAILABLE NOW.22.5mm PN: 6078. A$44ea AVAILABLE NOW.
=====================================================================================================
WR MATCH BARREL ACTION WRENCHFOR AFTERMARKET MATCH FITTED BARRELS, BUT CAN ASSIST REMOVAL OF FACTORY FITTED BARRELS...
The rifle barrel action wrenches by WR are improved from the 1998 version.- Heat Treated 40CR steel (tough but also reduced chance of damaging the receiver).- 19mm hex nut end. Not flanged, so can run multiple spanners/levers.- Black surface finished.- Stronger by design allowing minimal weight.
These units likely will not alone take off a factory barrel, however they can certainly assist the process. Typically an action encapsulating socket is used for factory fit barrels to receivers, but this action wrench in the rear allows to assist with leverage and torsion.
- #1 Remington 700 SA and LA, Savage M12, Rem 600, Stolley, Impact 737R, BAT CT. A$125ea P/N 6031. AVAILABLE NOW.- #2 Howa 1500. A$125ea P/N 6032. AVAILABLE NOW.- #3 Tikka T3x and variants, Win M70, Ruger 77. A$125ea P/N 6033. AVAILABLE NOW.- #4 Howa Weatherby Mossberg Mini's, Tikka M55, M65* A$120ea P/N 6034. AVAILABLE NOW.* Tikka M65 is not perfect fit for #4, but will help. Please ask before ordering.
(Absolute solution without the ridiculous price tag).
=====================================================================================================
ENQUIRIES: e-mail waters rifleman via the contact form on the HOME PAGE...Please simply advise which items you are interested in, how many and your location.Please check your reply email address (all correspondence is via email ONLY)....You’ll then be directed to a distributor that services your region...